Blank Dye Sublimation Face Masks. Pack of 10.
These blank dye sublimation face masks are made from three layers of fabric, two outer layers of polyester and an inner cotton layer.
This is the smaller version – suitable for children, but also suitable for adults who prefer a smaller face covering.
Black edges, black elastic, and come with black plastic toggles for adjustment.
Dimensions: 165mm x 110mm (approx).
Machine washable.
Individually bagged, resealable, sold in packs of 10.
For how to thread the elastic through the adjustment toggles, see:
Please note: These face masks are not medical face masks, or PPE, and are not sold as such.
Pressing Instructions
Instructions:
For full coverage designs, 180 – 190 C for 80-120 seconds.
Print images with gaps in between for taping, and use a strip of heat proof tape across all four corners – or, for faster production, just across 2 opposite corners (such as bottom left, top right) and just take care when flipping over onto bottom heat press table that the mask doesn’t fold over.
The first time you’re printing a particular design, if it’s full coverage design, we’d recommend giving it around 80 seconds at 180-190C, then quickly open the press, lift up one corner and see if it’s fully subbed, if not, put back down, press for a further 10-20 seconds and increase time accordingly with that design. We find designs with black backgrounds take up to about 100 – 120 seconds, but it does depend on coverage and colours.
For designs with white in the background, we’d recommend 170-180C, for 60-80 seconds, this is to reduce the black speckling that you’ll get with these masks if there’s empty background.
Quantity Discounts
You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they’ll cost.
| Quantity |
Price per unit |
| 20+ |
£5.50 |
| 100+ |
£5.15 |
£ 0
