The Transmatic TS-2M is a 40×50 cm / 15.7 x 19.7 inch drawer operated heat transfer press.
Need advice? See our Heat Press Guide.
FREE DELIVERY – Just enter the discount code “heatpress” at checkout. (The delivery price will still show, but you will see a discount equal to the delivery cost)
These presses differ from most heat presses, as they combine the positive aspects of a swing away heat press, without the negatives which are usually associated with using a swing press. That is, the operator doesn’t have to operate with the heat of the platen blasting directly towards their hands and the transfer, as would be the case while working on the lower table of a clamshell press. The bottom table simply slides out away from the heat platen, and then slides back under, instead of having to swing the top platen out of the way as would be the case with a swing away heat press.
This means that you don’t need to dedicate as much space to this heat press as you would with a swing head press of the same size. Usually you would need the full length of the platen free at the side and the rear of the press, which means it can’t just be neatly plonked in the corner of a room. These drawer operated presses however do not present the same issues, and can be tucked in a corner. You will require more lateral space than with a swing head press i.e. the space required to pull the drawer out, but the overall space usage of a drawer operated press is significantly less than with a swinger press.
As with the other Transmatic presses, the top plate isn’t rigidly fixed, which provides flexibility when it comes to the application of pressure.
The Transmatic TS-2M features the same high quality digital controller found in all the Transmatic heat presses, which is a very simple to use digital controller which requires little or no head scratching to master.
- Platen size (and max working size) 50 x 40 cm
- Temperature range 40-285 ° C
- Pressure range 0-600 g per cm2
- Time 0-999.9 seconds
- Power supply 230 Volt, single phase
- Maximum power 4.4 kW
- Consumption KW/H 2.2
- Net weight 64 Kg
- 12 months return to base warranty